Table of Contents
Advertisement
9.7
GENERAL INSTRUCTIONS FOR GRAMMER SEATS____________________
•
The operating instructions must be read in full before use.
•
The driver's seat may only be fitted, serviced and repaired by specialist personnel, In accordance with
national regulations and the vehicle manufacturer's fitting instructions.
•
The national fitting regulations can be obtained from GRAMMER or from agencies of the company, or from
the vehicle manufacturer.
•
A correctly functioning and individually adjusted driver's seat is essential to your health.
•
Take adequate care of your seat and have it serviced regularly to ensure that it functions correctly.
•
The functional checks are to be carried out at least as regularly as vehicle services (see maintenance plan
for vehicle).
•
These operating instructions must always be kept with the driver's seat. If the seat is passed on to a third
party, it must be accompanied by the relevant operating instructions.
Safety instructions
•
If you need to connect cables to the vehicle supply network, strictly observe the following instructions:
•
Before you connect a seat switch, seat heater or compressor, you must obtain the relevant electrical data
for the respective vehicle with reference to voltage, protection and the kind of connections from the
manufacturer, from GRAMMER or the company's agencies.
DC
Compressor
12V
10A
24V
10A
48V
10A
Seat Switch - Current Carrying Capacity
12V DC
250V DC
•
For safety reasons, the installation and connection to the vehicle supply network must be carried out by
authorized specialist personnel only.
•
The seat connections must be protected independently of other vehicle components.
Notes Concerning Seat Switch:
Minimum and maximum current carrying capacity for purely resistive load.
In case of inductive or capacitive load, the manufacturer must install a protective circuit
breaker for the consumers in the vehicle. If there are any uncertainties, please ask the vehicle manufacturer
before making connections.
Driver's seats that have been adjusted incorrectly have a smaller moving area. To prevent damage to the
driver's back and to the seat, the seat must be adjusted for the driver's weight before use and before every
change of driver.
To prevent injury, no objects must be placed within the moving area of the driver's seat.
Before commissioning of the driver's seat, ensure packaging material has been removed from the seat cushion
and the backrest upholstery.
To eliminate any risk of accident, the settings must be checked to ensure they are correctly engaged before the
vehicle is driven.
Seat Heat/
Compressor
20A
15A
10A
10mA (min.)
5A (max)
ADJUSTMENTS 9
en-105
Advertisement
Table of Contents
