Table of Contents
Advertisement
Open the maintenance flap.
1.
If you place a cloth beneath the
maintenance flap, you can collect
the remaining water from the base
unit.
Open the lever for the heat ex-
2.
changer cover.
Pull out the heat exchanger cover
3.
by the handle.
Cleaning and servicing en
Cleaning the base unit
You can remove any visible dirt in the
base unit.
CAUTION
Risk of cutting!
Touching sharp edges on the heat
exchanger may lead to cuts.
Do not touch the fins on the heat
▶
exchanger.
Open the base unit → Page 36.
1.
Use a soft brush to clean the heat
2.
exchanger cover.
Make sure that you remove all dirt
from the seal.
Lift the middle tab on the insert
3.
slightly.
37
Advertisement
Table of Contents
