Table of Contents
Advertisement
en Installation and connection
Installation loca-
tion
Against a wall
4.4 Water drain hose
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. Use the water drain
hose to drain away excess condens-
ation directly into the waste water
system.
Notes
¡ Operate this appliance using the
water drain hose provided. If you
connect the water drain hose
→ Page 14, you do not have to
regularly empty the condensation
container → Page 33.
¡ You can order this optional
→ "Accessories", Page 28 from
our customer service.
Connecting the water drain hose
If you do not want to regularly empty
the appliance's condensation con-
tainer, connect the water drain hose.
ATTENTION!
When operating the appliance
without the water drain hose being
connected properly, liquid may leak
out of the connecting piece.
Before operating the appliance,
▶
connect the water drain hose prop-
erly to the connecting piece.
14
Requirements
Do not trap the
hoses between
the wall and the
appliance.
Requirements
¡ The appliance and the accessory
have been unpacked.
→ "Unpacking the appliance",
Page 12
¡ The appliance is installed at the in-
stallation location.
→ "Requirements for the installa-
tion location", Page 13
Pull out the condensation hose
1.
from the connecting piece.
The condensation hose is connec-
ted to the connecting piece at the
factory.
Note: When removing the con-
densation hose, liquid may leak
out of the connecting piece.
Push the condensation hose into
2.
the holder.
Advertisement
Table of Contents
