Energy Saving Mode; Installation And Connection; Unpacking The Appliance; Scope Of Delivery - Siemens WQ33G2CCDN User Manual And Installation Instructions

en Installation and connection
Spin the laundry in the washing ma-
chine before drying.
a If the laundry is excessively damp,
this extends the programme dura-
tion and increases energy con-
sumption.
Observe the programme's maximum
load capacity.
→ "Programmes", Page 26
a If the maximum load is exceeded,
this extends the programme dura-
tion and increases energy con-
sumption.
After drying, clean the fluff filter
→ Page 30.
a If the fluff filter is dirty, this reduces
the air flow in the appliance, ex-
tends the programme duration and
increases energy consumption.
Dry the filters in the filter system of
the base unit → Page 32 thoroughly
after cleaning.
a If the filters are damp, this extends
the programme duration and in-
creases energy consumption.
3.3 Energy saving mode
If you do not use the appliance for an
extended period, it automatically
switches to energy-saving mode. All
displays go out and
load flashes.
Energy-saving mode ends when you
use the appliance again.
12
⁠ Start/Re-

Installation and connection

4 Installation and con-
nection
Installation and connection
4.1 Unpacking the appliance
ATTENTION!
Objects remaining in the drum that
are not designed for operation with
the appliance may cause material
damage and damage to the appli-
ance.
Remove these objects, along with
▶
all supplied accessories, from the
drum before starting the appliance.
Remove any packaging and pro-
1.
tective covers completely from the
appliance.
→ "Disposing of packaging",
Page 11.
Check the appliance for visible
2.
damage.
Open the appliance door.
3.
→ "Basic operation", Page 29
Remove any accessories from the
4.
drum.
Close the appliance door.
5.
4.2 Scope of delivery
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
ATTENTION!
If the appliance is operated with in-
complete or defective accessories,
the appliance may not be able to op-
erate properly, or this may result in
material damage or damage to the
appliance.
Do not operate the appliance with
▶
incomplete or defective accessor-
ies.