Auto-Adjusting The Mechanical End - Canon CN8x15 Operation Manual

4. Operation in Full Mode

4.1.5 Auto-Adjusting the Mechanical End

Perform automatic adjustment of the mechanical end in zoom, focus, and iris operations on the lens and drive unit.
If "Auto-Adjustment: Error/Lens Interface: Non-Connected" is displayed after adjustment, contact Canon or your
dealer.
Initial Top Screen
[ ]
1
MENU
[ Basic ] [Adj]
[ I-Gain ] [Trk]OFF
[I-Tq]H
Fr1P
A
Screen A
[ ] 1
MENU
[ Basic ]
[Adj]
[ I-Gain ] [Trk]OFF
[I-Tq]H
Fr1P
A
Lens
AutoAdjust
y/n
OK?
Auto-Adjustment:
Succeeded
Lens Interface:
Connected
MENU
Note
1
Press and then
Your selection is now highlighted.
Press .
2
The display switches to the Auto-Adjustment screen.
3
Press and then
Adjustment now begins.
During adjustment, the screen blinks.
After this, adjustment is finished.
Press after adjustment to return to Screen A.
[Adj]
E80
.
.
[Adj]