Canon CN8x15 Operation Manual page 107

Continued from previous page
Copy Selection Screen
1
User
ToOtherLens
UserCopy : y/n
y/n
AllCopy :
Target User Selection Screen
1
User
ToOtherLens
To No. : 1
Copy: y/n
1
User
ToOtherLens
To No. : 1
y/n
Copy:
1
User
ToOtherLens
To No. : 3
Copy: y/n
User 1
ToOtherLens
To No. : 3
Copy: y/n
Now Data Copy
Please Wait...
Screen A
User 1
Copy
ToOtherLens
Unlock
Access:
MENU
The display switches to the Copy selection screen.
7
Press .
The display switches to the Target user selection screen.
8 Press .
[To No.] is underlined.
9 Press or
Press left or right until you reach the number of the user on the target lens to copy
settings to.
10
Press .
[Copy] is underlined, and you can select {y} (yes) or {n} (no).
11
Press and then
After a message is displayed
indicating that copying is in
progress, the display reverts to
Screen A.
The settings have now been
copied between lenses.
1
User
or
E105
.
*1:
*1
.
*2:
Note:
*2
× 6
4. Operation in Full Mode
Pressing the Set key in this
step begins the copying
process. Note that once
copying begins, you cannot
restore the original settings.
To avoid problems during
copying, do not operate
controls or press the Display
switch on the source or target
lenses. Do not perform other
operations.
If copying fails, an error
message is displayed.
Respond as described in "(3)
Responding to Errors."