Canon CN8x15 Operation Manual page 145

Specifying Servo Type from Zoom Demand
Specify either the speed or position servo as the type of servo to use from the zoom demand.
First, switch to the user for whom the settings apply.
(For instructions, see "4.1.3 Switching Users" or "4.2.1 User Screen Settings: Switching Users.")
Initial Top Screen
[ ]
1
MENU
[ Basic ] [Adj]
[ I-Gain ] [Trk]OFF
[I-Tq]H
Fr1P
A
Zoom Screen
[ ]
Zoom
Tracking: OFF
Movement
CurveMode
[ ]
Zoom
SpeedAdj
Control: Sped
VR-Dem: ON
[ ]
Zoom
SpeedAdj
Control: Posi
VR-Dem: ON
Options
Description Speed servo
(D): Default value
MENU
1
Press
The display switches to the Zoom screen.
2
Press
[Control] is underlined.
The previous or default function is highlighted.
3 Press
Press left or right to switch the function to {Sped} or {Posi}.
(D)
Sped Posi
Position servo
Zoom
× 4
Important
once and four times.
five times.
or .
[ ]
× 5
E143
4. Operation in Full Mode
Note: Selecting {Posi} will disable
the seesaw switch.
Additionally, only one demand
connector can be connected
when {Posi} is selected.
Normally, select {Sped}.
or