Table of Contents
Advertisement
1. Roll up paper in opposite direction to paper curl as shown below.
1.
2. Check that paper is now flat.
2.
We recommend printing curl-corrected paper one sheet at a time.
Note
• Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward.
•
Follow the instructions below to curl the paper outward up to 0.1 in. / 3 mm (C) in height before printing.
This may improve the print result.
(B) Print side
We recommend feeding paper that has been curled outward one sheet at a time.
Set printer to prevent paper abrasion.
Check4
Adjusting the setting to prevent paper abrasion will widen the clearance between the print head and the paper.
If you notice abrasion even with the media type set correctly to match the paper, set the printer to prevent paper
abrasion using the operation panel or the computer.
This may reduce the print speed.
* Once you have finished printing, undo this setting. Otherwise, it will apply to subsequent print jobs.
Select Settings on HOME screen > Device settings > Print settings and set Prevent paper abrasion to ON .
Changing Settings from Operation Panel
If ink bleeds, make sure that Improve bleeding and thickened black text/
Check5
lines (plain paper) is checked. (Windows)
It may be possible to improve the bleeding of characters and lines when printing on plain paper.
Set it at Print Options dialog box on Page Setup sheet in the printer driver.
Restore the setting after printing.
436
Advertisement
Table of Contents
