Performs IPv4 or IPv6 setting.
•
• WSD setting
Setting items when you use WSD (one of the network protocols supported in Windows).
◦ Enable/disable WSD
◦
Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in
•
Windows.
◦
◦ Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
◦ WSD scan from this device
◦
Selecting Enable allows you to transfer the scanned data to the computer using WSD. To transfer
the scanned data, press Color button.
Note
•
• When you forward the scanned data to the computer searched using WSD, you cannot select
the document type.
◦ Timeout setting
◦
Specifies the timeout length.
•
• Bonjour settings
Setting items when you use Bonjour.
◦
◦ Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
◦
◦ Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected
•
devices.
• LPR protocol setting
•
Enables/disables the LPR setting.
•
• RAW protocol
Enables/disables RAW printing.
• LLMNR
•
Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Enable allows the printer
to detect printer's IP address from the printer name without a DNS server.
•
• IPP settings
209