Connecting with Wireless Direct
You can connect devices (e.g. computer, smartphone, or tablet) to the printer by two methods below.
•
• Wireless connection (connecting devices via a wireless router)
•
• Direct wireless connection (connecting devices directly without a wireless router)
This section describes Wireless Direct, which allows you to print by connecting the devices to the printer
directly.
• Connecting
•
Connecting a smartphone/tablet/computer to the printer
•
• Changing settings
Changing Wireless Direct Setting
Important
•
• You can connect up to 5 devices to the printer at the same time with Wireless Direct.
•
• Check the usage restrictions and connect the printer to the Wireless Direct.
Restrictions
•
• Some printers support IEEE802.1X/EAP (WPA/WPA2/WPA3 Enterprise). If you enable Wireless Direct
while IEEE802.1X/EAP (WPA/WPA2/WPA3 Enterprise) is enabled, IEEE802.1X/EAP (WPA/WPA2/
WPA3 Enterprise) is disabled.
When IEEE802.1X/EAP (WPA/WPA2/WPA3 Enterprise) is enabled, enable Administrator mode so
that the Wireless Direct settings cannot be changed.
Connecting a smartphone/tablet/computer to the printer
1. Enable Wi-Fi function on smartphone/tablet/computer.
1.
Enable Wi-Fi in the Settings menu on your smartphone/tablet/computer.
For instructions on enabling the Wi-Fi function, refer to the instruction manual for your smartphone/
tablet/computer.
2. Select Settings on HOME screen and press OK button.
2.
3.
3. Select LAN settings and press the OK button.
4.
4. Select Wireless Direct and press the OK button.
410