User Controls - Acer CB322QK User Manual

User controls

Power Switch/Power LED:
To turn the monitor ON or OFF.
Lights up to indicate the power is turned ON.
Using the Shortcut Menu
Press the function button to open the shortcut menu. The shortcut menu lets you quickly
select the most commonly accessed settings.
1
2
/ /
3
/ /
4
5
Adaptivesync(DP):
It can allow a Adaptivesync supported graphics source to dynamically adjust display
refresh rate based on typical content frame rates for power efficient, virtually stutter free
and low-latency display update.
KVM switch:
The built-in KVM switch allows you to control up to 2 computers from a single set of
keyboard and mouse connected to the monitor.
Power button
OSD functions/
Down/Right
Input source
switching/Up/Left
Volume Key
Enter
Empowering Key
Exit
Turns the monitor on/off.
a. Press to view the OSD.
b. Press this button to select the desired item
when in OSD menu.
a. Use the INPUT hotkey to enter Input select
function.
b. Press this button to select the desired item
when in OSD menu.
Press this button to adjust volume.
a. Press to enter a selection in the OSD.
b. When OSD Lock push 3 seconds Lock function
is disabled
Press this button to select scenario mode.
When the OSD menu is active, this button will act
as the exit key (exit OSD menu).
12
1 2 3 4
5