Advertisement

Quick Links

Acer LCD Monitor
User Guide

Advertisement

Table of Contents
loading

Summary of Contents for Acer CB382CUR

  • Page 1 Acer LCD Monitor User Guide...
  • Page 2 Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies.
  • Page 3: Information For Your Safety And Comfort

    Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem. •...
  • Page 4: Safe Listening

    Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions.
  • Page 5: Product Servicing

    • If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
  • Page 6: Potentially Explosive Environments

    We at Acer are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products.
  • Page 7: Lcd Pixel Statement

    LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. This product has been shipped enabled for power management: •...
  • Page 8: Taking Care Of Your Vision

    Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes •...
  • Page 9: Declaration Of Conformity

    (“x” = 0~9, a ~ z, A ~ Z, or blank) We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized...
  • Page 10: What Is Energy Star

    ENERGY STAR® Acer’s ENERGY STAR qualified products save you money by reducing energy costs and helps protect the environment without sacrificing features or performance. Acer is proud to offer our customers products with the ENERGY STAR mark. What is ENERGY STAR?
  • Page 11 A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories.
  • Page 12: Federal Communications Commission Declaration Of Conformity

    Acer America Corporation 333 West San Carlos St., San Jose Suite 1500 CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following...
  • Page 13 Information for your safety and comfort Safety instructions Special notes on LCD monitors Cleaning your monitors Accessibility Safe listening Warnings Using electrical power Product servicing Potentially explosive environments Additional safety information IT Equipment Recycling Information Disposal instructions LCD pixel statement Tips and information for comfortable use Finding your comfort zone Taking care of your vision...
  • Page 14 Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide AC Adapter LCD Monitor CB2 Series/CB382CUR USER GUIDE DP Cable HDMI cable USB cable...
  • Page 15: Screen Position Adjustment

    SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the height/tilt of the monitor. • Height Adjustment After pressing the top of the monitor then you can adjust the height of the monitor. 150mm • Tilt Please see the illustration below for an example of the tilt range.
  • Page 16 • Swivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle. 360°...
  • Page 17: Connecting The Adapter And Ac Power Cord

    Connecting the adapter and AC Power cord • Check first to make sure that the power cord you use is the correct type required for your area. • The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area.
  • Page 18: Display Data Channel (Ddc)

    Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing.
  • Page 19 19-pin color display signal cable PIN No. Description PIN No. Description TMDS Data2+ TMDS Data2 Shield TMDS Data2- TMDS Data1+ TMDS Data1 Shield TMDS Data1- TMDS Data0+ TMDS Data0 Shield TMDS Data0- TMDS Clock+ TMDS Clock Shield TMDS Clock- Reserved (N.C. on device) DDC/CEC Ground +5V Power Hot Plug Detect...
  • Page 20: Standard Timing Table

    Standard timing table VESA MODE MODE Resolution 640x480 60Hz 640x480 72Hz 640x480 75Hz 640x480 67Hz VESA 720x400 70Hz SVGA 800x600 56Hz SVGA 800x600 60Hz SVGA 800x600 72Hz SVGA 800x600 75Hz 832x624 75Hz 1024x768 60Hz 1024x768 70Hz 1024x768 75Hz 1152x870 75Hz VESA 1152x864 75Hz...
  • Page 21: Installation

    *POWER CORD specifications refer to page15 *For the installation of replaceable parts, please refer to the above installation instructions. *Users may go to the local service network to replace /purchase the qualified replaceable parts. For local service centers and service contacts, please refer to https://www.acer.com/ac/en/US/content/support...
  • Page 22: User Controls

    User Controls External controls Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power saving mode. Function key Press to view Main page. Press again to enter hotkey1 function. When the Function Menu is active, press this key to view the basic information for your monitor and current input or reset the custom color settings to the factory defaults.
  • Page 23: Using The Shortcut Menu

    Using the Shortcut Menu ------------------------------------------------------------------------------------------------------------- Note: The following content is for general reference only. Actual product specifications may vary. The OSD (onscreen display) can be used to adjust the settings of your LCD monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings.
  • Page 24 Selecting the input Open the Input control and select HDMI2.0, DP ALT, DP In or Auto Source. When you are done, press the joystick to exit current page and store. Input Input HDMI2.0 Auto Source Off Move Enter Main menu 1.
  • Page 25 Note: Adjusts the balance between light and dark shades. Contrast: Adjust the contrast from 0 to 100. ----------------------------------------------------------------------------------------------------------- Note: Sets the degree of difference between light and dark areas. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the brightness without changing lighter shades.
  • Page 26 Toggle the joystick to the up or down to select Color from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. Toggle to the left or right to adjust the sliding scales. Gamma mode allows you to adjust the luminance tone.The default value is 2.2 (standard value for Windows).
  • Page 27 Performance Mode - User Normal Picture Over Drive Color AMD FreeSync Audio Off Performance Ultra-Low Latency Off Aim point Off System Save setting to... Move Enter Press the MENU key to open the OSD. Toggle the joystick to the up or down to select Performance from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter Toggle to the left or right to adjust the sliding scales.
  • Page 28 Mode - User Picture Language English Color OSD Timeout Audio Transparency Off Refresh rate num Performance Off OSD Lock Off System Save setting to... Move Enter Press the MENU key to open the OSD. Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it.
  • Page 29 Press the MENU key to open the OSD. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it. Toggle to the left or right to adjust the sliding scales.
  • Page 30: Save Setting To...(User Mode Only)

    Save Setting to…(User mode only) Mode - User Picture Mode: Standard Color Mode: Eco Audio Mode: Graphics Performance Mode: Movie System Save setting to... Move Enter Press the MENU key to open the OSD. Toggle the joystick to the up or down to select "Save Setting to..." from the OSD.Then toggle to the right to navigate to the element you wish to adjust and press the joystick to enter it.
  • Page 31: Troubleshooting

    Check if the video signal cable is properly connected at the back of monitor. Check if the computer system is switched on and in power saving/standby mode. Note: Acer monitor is purposed for video and visual display of information obtained from electronic devices. Regulatory Compliance 217186...
  • Page 32 Product Information for EU Energy...

Table of Contents