Page 2
Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies.
Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Acer monitor is purposed for video and visual display of information obtained from electronic devices. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem.
Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions.
• If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
We at Acer are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products.
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit https://www.acer-group.com/sustainability/en/our- products-environment.html LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques.
Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes •...
Page 9
(“x” = 0~9, a ~ z, A ~ Z, or blank) We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized...
Acer America Corporation 333 West San Carlos St., San Jose Suite 1500 CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Supplier's Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following...
Page 11
ENERGY STAR® Acer’s ENERGY STAR qualified products save you money by reducing energy costs and helps protect the environment without sacrificing features or performance. Acer is proud to offer our customers products with the ENERGY STAR mark. What is ENERGY STAR?
Information for your safety and comfort Safety instructions Special notes on LCD monitors Cleaning your monitor Accessibility Safe listening Warnings Using electrical power Product servicing Potentially explosive environments Additional safety information IT Equipment Recycling Information Recycling Information for the United States of America 6 Disposal instructions LCD pixel statement Tips and information for comfortable use...
Unpacking Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide *HDMI Cable *DP Cable *AC Power cord (Optional) (Optional)
SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor. • Attaching the Base Note: Remove the monitor and monitor base from its packaging.Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching the screen. •...
• Height Adjustment After pressing the top of the monitor then you can adjust the height of the monitor. 165mm • Swivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle. • Horizontal Adjustment Before rotating the display,lift it to the top position and then push it back to the utmost degree.
Connecting the Power cord • Check first to make sure that the power cord you use is the correct type required for your area. • The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area.
Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing.
Lane3(n) Config1 Config2 AUX_CH (n) AUX_CH (p) Hot Plug Detect DP Power_Return DP Power * only for certain models 24-pin USB 3.1 Type C cable PIN No. Signal Assignment PIN No. Signal Assignment SSTXp1 SSTXp1 SSTXn1 SSTXn1 VBUS VBUS SBU1 SBU1 VBUS VBUS...
Standard timing table VESA MODE MODE Resolution 640x480 60Hz SVGA 800x600 56Hz SVGA 800x600 60Hz 1024x768 60Hz 1280x960 60Hz 1280x720 60Hz SXGA 1280x1024 60Hz WXGA+ 1440x900 60Hz WSXGA+ 1680x1050 60Hz WUXGA 1920x1080 60Hz 2560x1080 60Hz 3440x1440 30Hz* 3440x1440 60Hz** * DP ALT (Type C) input and USB3.2 = 0n can support 3440x1440@30Hz. ** DP ALT (Type C) input and USB3.2 = Off can support 3440x1440@60Hz.
*For the installation of replaceable parts, please refer to the above installation instructions. *Users may go to the local service network to replace /purchase the qualified replaceable parts. For local service centers and service contacts, please refer to https://www.acer.com/ac/en/US/content/support *IR webcam feature depends on model, sku and/or region.
User Controls External controls Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby, power saving and OSD locked. Function key Press to view Main page. Press again to enter hotkey1 function. When the Function Menu is active, press this key to view the basic information for your monitor and current input or reset the custom color settings to the factory defaults.
Using the Shortcut Menu ------------------------------------------------------------------------------------------------------------- Note: The following content is for general reference only. Actual product specifications may vary. The OSD (onscreen display) can be used to adjust the settings of your LCD monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality and general settings.
Page 24
Input switch Hot Key Open the Input control and select HDMI1 (2.0), HDMI2 (2.0), DP, DP ALT or Auto Source. When you are done, press the joystick to exit current page and store. Input Input Auto Source Adjust Main Menu Hot Key Open the Function page to adjust the functions, settings which you want using the arrows.
Page 25
Ultra-Low Latency: Set to On to speed up the processing time of the display. ----------------------------------------------------------------------------------------------------------- Note: • Ultra-Low Latency is support only Wide Mode ="Full". • Ultra-Low Latency is not support video interlace mode. • Detail function definition & information, please refer to Acer Ultra-Low Latency specification. Picture 1280x800 Standard Mode Resolution Input...
Page 26
ACM: Turn ACM on or off. ----------------------------------------------------------------------------------------------------------- Note: Set to "On", will be based on the current screen to dynamic contrast adjustment. HDR: can control off and auto, the default is off, set to auto will automatically detect and deal with HDR signal. -------------------------------------------------------------------------------------------------------- Note: 1.
Page 27
Color 1280x800 Standard Mode Resolution Input AdaptiveSync Performance Modes Picture Color Space Color Gamma Audio Color Temp Grayscale Mode System 6-axis Hue 6-axis Saturate Move Enter Exit Press the Menu Key to open the OSD. Toggle the joystick to the up or down to select Color Page from the OSD.Then toggle to the right to the function you wish to adjust and press the joystick to enter it.
Page 28
• Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), If to adjust the parameter the Modes will not jump to User mode, but the Color Space = “General” except. • Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), 6-Axis Hue & Saturate is gray out and unavailable. • Color Space = (sRGB/Rec.709/HDR/EBU/DCI/SMPTE-C), Grayscale Mode is gray out and unavailable.
Page 29
Audio 1280x800 Standard Mode Resolution Input AdaptiveSync Performance Volume Picture Mute Color Microphone Effect Audio Noise Reduction System Move Enter Exit Press the Menu Key to open the OSD. Toggle the joystick to the up or down to select Audio Page from the OSD. Then toggle to the right to the function you wish to adjust and press the joystick to enter it.
Page 30
1280x800 Standard Mode Resolution Input AdaptiveSync Performance Language Picture OSD Timeout Color Transparency Audio OSD Lock System Move Enter Exit Press the Menu Key to open the OSD. Toggle the joystick to the up or down to select OSD Page from the OSD. Then toggle to the right to the function you wish to adjust and press the joystick to enter it.
Page 31
System 1280x800 Standard Mode Resolution Input AdaptiveSync Performance Input HDMI1 (2.0) Picture Auto Source HDMI2 (2.0) Color Daisy Chain Audio Wide Mode DP ALT PIP/PBP Mode System Hot Key Assignment DDC/CI HDMI Black Level Quick Start Mode Move Enter Back Press the Menu Key to open the OSD.
Page 32
14. USB 3.2: The default is "On", can to controls determine the USB bandwidth. ----------------------------------------------------------------------------------------------------------- Note: USB 3.2 = "On" is Default • DP ALT support timing by source. • Support DP (2 Line) USB 3.2 = "Off'' • Support DP (4 Line) 15.
Page 33
Save Setting to…(User mode only) 1280x800 Standard Mode Resolution Input AdaptiveSync Performance Mode : Standard Picture Mode : ECO Color Mode : Graphics Audio Mode : Movie System Save Settings to... Move Enter Exit Press the MENU key to open the OSD. Toggle the joystick to the up or down to select "Save Setting to..."...
Page 34
Settings the USB Port Select (KVM) 1280x800 Standard Mode Resolution Input AdaptiveSync Performance USB Port Select Auto Picture USB 3.2 B-Type Color Power-Off C-Type Audio USB Charge System Move Enter Back You can follow below instruction to set up KVM for your monitor: •...
Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. DP/HDMI Mode (Optional) Problem LED status Remedy No picture visible Blue Using the OSD menu, adjust brightness and contrast to maximum or reset to their default setting.
Need help?
Do you have a question about the CB343CUR and is the answer not in the manual?
Questions and answers