Xerox B210DNI User Manual page 48

Configuring Auto Power Off
1. In Xerox CentreWare
®
2. Click Power Management.
Select the Auto Power Off Timeout settings required:
3.
• Enable: Use this option to enable the printer to power off automatically after the specified
time period. Click Enable, then specify the time the printer remains idle before it powers off
automatically. You can enter between 5 and 240 minutes.
Disable: Use this option to switch off the Auto Power Off function.
•
• Auto Detect: To set the printer to power off automatically when no activity is detected, click
Auto Detect.
Click Apply.
4.
5. Click OK.
Duplex Mode
This setting detects pages automatically that need to be printed on one side only. This feature
increases print speed.
1. In Xerox CentreWare
®
2. Click Duplex Mode.
For Smart Duplexing, click Enable.
3.
4. Click Apply.
5. Click OK.
Tray Settings
The Tray Settings determine how the printer manages the paper trays. There are two modes:
Bypass mode: This option ignores the tray attributes for printing a job. The print job will use the
•
media in the tray.
• Static mode: This option designates a tray as available for all jobs that use the type of paper in
the tray, and for print jobs that do not specify a tray.
Configuring Tray Settings
1. In Xerox CentreWare
®
2. Click Tray Settings.
3. For Manual Feed Slot:
a. Select a Mode.
To enable the tray confirmation screen, click Enable.
b.
4. For Tray 1, to enable the tray confirmation screen, click Enable.
Click Apply.
5.
6. Click OK.
Internet Services, click Properties
®
Internet Services, click Properties
®
Internet Services, click Properties
®
General Setup.

General Setup.

General Setup.

Xerox
®
General Setup
48
B210 Printer
User Guide