Controls And Connections - MartinLogan Vantage User Manual

Figure 1. Vantage Controls and Connections
C
ONTROLS AND
35Hz Level Knob
The 35Hz Level knob significantly adjusts the
level between 30 and 50Hz by ±10dB. This
is an area where peaks and dips of different
amplitudes often manifest in real environments.
This setting is dependent on room size and con-
struction, system configuration and personal
preference.
ESL Signal Input
These binding posts provides a place to connect
the signal that drives the XStat™ ESL transducer.
Woofer Signal Input
These binding posts provides a place to connect
the signal that drives the PoweredForce™ woofer.
Status Light
The Vantage is equipped with a multi-color LED
to indicate the current status of the woofers.
The following list explains the meaning of the
different colors:
No color: No power. The Vantage is not
plugged in.
Green: Play mode. This indicates the Vantage
detects an audio signal and has automatically
switched into play mode.
Yellow: Standby mode. This indicates the
Vantage has detected no audio signal for
approximately 5 minutes and has automatically
switched into standby mode.
Red: Initializing or Safe mode. This indicates
that the Vantage is initializing. This also indicates
if the Vantage's temperature has exceeded
nominal operating range. If the Vantage over-
heats, please allow the Vantage to cool and reset
it by unplugging the unit and plugging it back in.
AC Power Connection
Because your MartinLogan Vantage speakers
use an internal power supply to energize their
electrostatic cells and PoweredForce woofers,
they must be connected to an AC power source.
C
ONNECTIONS

Controls and Connections

7