Table of Contents
Advertisement
What to do if your product is unstable
1
2
3
22
POSITIONING YOUR REFRIGERATOR
Gently push the refrigerator back until
the rear rollers contact the floor.
Measure the gap under the front foot,
which has come off the floor.
Obtain some solid packing material
(hardwood, plastic, etc) which fits
firmly into the gap under the foot.
Wind both front feet up and roll the
product out of position.
Place the packing material in the
location diagonally opposite the front
roller that lifts off the floor.
Ensure the packing material stays in
place when the product is pushed
back into position.
Roll the refrigerator back into
position and adjust front feet. Check
alignment and door closing action are
satifactory. Make small adjustments to
the front feet where necessary.
Advertisement
Table of Contents
