Basic Playback
1.
Turn the player on .
Set the Power Switch to the ON position to turn the player on.
2.
Load a disc.
Slide the Disc Compartment Latch to the right to open the compartment lid. Insert a disc
with the label-side up. Close the lid by hand (the lid will click into place).
•
If a single-sided disc is inserted upside-down, the player will display "NO DISC" or
"BAD DISC".
3.
Start playback.
Press PLAY to start playback (some discs may start playing automatically).
Play/Pause/Stop
•
Press
to play the disc for the first time.
•
Press
during playback to pause. Press
•
Press
during playback to stop the disc ("Pre-Stop"). Press
time-point at which the disc was stopped.
•
Press
when the disc is "Pre-Stopped" to stop playback completely. (When
the disc will start playing from the beginning.)
Next/Previous (Skip)
•
Press
to skip forward one track (DVD, CD, MP3, etc).
•
Press
to skip back one track (DVD, CD, MP3, etc).
Forward/Reverse (Scan)
•
Press
to scan forward through the disc. Each successive press of
of forward scanning.
•
Press
to scan through the disc in reverse. Each successive press of
rate of reverse scanning.
Slow
•
Press SLOW for slow-motion playback. Each successive press of SLOW will change the rate
of slow-motion playback. Press
•
Press STEP frame-by-frame playback. Each successive press of STEP will advance the
video one frame. Press
Note:
Audio will be muted during fast-forward, fast-reverse, and slow-motion playback.
BASIC OPERATIONS
to resume normal playback.
to resume normal playback.
again to resume playback.
to resume playback at the
Normal
x2
x4
Normal
x1/2
x1/4
is pressed,
x8
x16
x32
will change the rate
will change the
x1/8
x1/16
x1/32
15