Table of Contents
Advertisement
Basic Disc Playback
1.
Prepare the power supply.
Set the Power Switch to the ON position to turn the player on.
2.
Load a disc.
Press the Open button to open the disc compartment lid. Insert a disc with the label-side
up. Close the lid by hand (the lid will click into place).
•
If a single-sided disc is inserted upside-down, the player will display "NO DISC" or
"BAD DISC".
3.
Start playback.
Make sure the AV Switch is set to AV OUT to use the player's built-in LCD screen. Press
PLAY to start playback (some discs may start playing automatically).
Play/Pause/Stop
•
Press
to play the disc for the first time.
•
Press
during playback to pause. Press
•
Press
during playback to stop the disc ("Pre-Stop"). Press
time-point at which the disc was stopped.
•
Press
when the disc is "Pre-Stopped" to stop playback completely. (When
the disc will start playing from the beginning.)
Previous/Next (Skip)
•
Press
to skip back one track (DVD, CD, MP3, etc).
•
Press
to skip forward one track (DVD, CD, MP3, etc).
Reverse/Forward (Scan)
Normal
x2
x4
•
Press
to reverse through the disc. Each successive press of
reverse playback.
•
Press
to fast-forward through the disc. Each successive press of
of forward playback.
Slow
Normal
x1/2
x1/4
•
Press SLOW for slow-motion playback. Each successive press of SLOW will change the rate
of slow-motion playback. Press
•
Press STEP frame-by-frame playback. Each successive press of STEP will advance the
video one frame. Press
Note:
Audio will be muted during fast-forward, fast-reverse, and slow-motion playback.
BASIC OPERATIONS
x8
x16
x32
x1/8
x1/16
x1/32
to resume normal playback.
to resume normal playback.
again to resume playback.
to resume playback at the
is pressed,
will change the rate of
will change the rate
17
Advertisement
Table of Contents
