Table of Contents
Advertisement
10
www.electrolux.com
To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
4.8 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.
When you deactivate the
hob, you also deactivate this
function.
4.9 The Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob with
Touch
Deactivate the hob with
To deactivate the function: activate the
hob with
Touch
Deactivate the hob with
To override the function for only one
cooking time: activate the hob with
comes on. Touch
Set the heat setting in 10 seconds.
You can operate the hob. When you
deactivate the hob with
operates again.
4.10 OffSound Control
(Deactivation and activation of
the sounds)
Deactivate the hob. Touch
seconds. The display comes on and
. Do not set the heat setting.
for 4 seconds.
comes on.
.
. Do not set the heat setting.
for 4 seconds.
comes on.
.
for 4 seconds.
the function
.
goes out. Touch
comes on. Touch
choose one of the following:
.
•
•
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
• you touch
.
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control
panel.
.
4.11 Power limitation
Originally the hob is at its highest
possible power level.
To decrease or increase the power
level:
1. Deactivate the hob.
2. Touch
comes on and goes off.
3. Touch
comes on.
4. Touch
5. Touch
power level.
Power levels
Refer to "Technical information" chapter.
• P0 — 7200 W
• P1 — 1500 W
• P2 — 2000 W
.
• P3 — 2500 W
• P4 — 3000 W
• P5 — 3500 W
• P6 — 4000 W
• P7 — 4500 W
• P8 — 5000 W
• P9 — 6000 W
for 3
for 3 seconds.
of the timer to
- the sounds are off
- the sounds are on
for 3 seconds. The display
for 3 seconds.
. P0 comes on.
/
of the Timer to set the
CAUTION!
Make sure that the selected
power fits to the house
installation fuses.
or
you can
or
Advertisement
Table of Contents
