Hall Sensor
Stator Housing
Water Guide
⑤ Loosen the 6 fixing screws on the stator.
SNAP RING.
⑥ Check the direction of SNAP RING.
⑦ Preventing fallen the stator, tighten with one
⑧ For assembly take care lead wire's state, it
7) Replacement of Bearing housing
④ Loosen 14 Fixing screws on the Bearing
39
(Lower upper position screws)
(The handle of snap ring is toward to rotor and
stator.)
hand and then loosen the last screw.
produce a noise and cut attach the rotor.
asm
Housing ASM and pull up it.