EGO POWER+ LM2110 Operator's Manual page 40

REMOVING THE BLADE
WARNING:
the cutting edges with rags or other materials when performing any maintenance on
the mower blade. Always remove the battery pack when servicing or transporting the
mower.
NOTICE:
The following tools are
required for replacing the blade:
◾
9/16'' (14 mm) wrench (impact
wrench is recommended)
◾
9/16'' (14 mm) torque wrench
◾
Manual screwdriver or metal rod with
a diameter of 1/4" (6.35 mm)
Tools that make life easier: Impact wrench
with 9/16" sockets make the removal of
the bolt much easier.
1. Stop the motor, remove the battery
pack from the mower.
2. Turn the mower on its side.
3. While wearing protective gloves,
place a manual screwdriver or metal
rod, 1/4" (6.35 mm) or less in the
stabilizer hole. This is to stop the
blade from rotating while loosening
the bolt (Fig. 21).
4. Use a 9/16 inch (14 mm) wrench
(impact wrench is recommended) to
turn the blade bolt counterclockwise
to loosen and remove the bolt.
5. Remove the washer and the blade
(Fig. 22).
6. Save the fan on the motor shaft
(Fig. 23).
40
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2110/LM2110-FC/LM2110SP/LM2110SP-FC/LM2120SP/LM2120SP-FC
Always protect your hands by wearing heavy gloves or wrapping
21
Loosen
22
23
Stablizer
Fan
Blade
Out
Flange
Bolt
Fan