Rocketraid 600L/600Ls Bios Setting Utility; Bios Settings Overview - HighPoint RocketRAID 600L User Manual

Sata 6gb/s pci-express 2.0 raid host adapters

Hide thumbs Also See for RocketRAID 600L:

Table of Contents

5.3 RocketRAID 600L/600LS BIOS Setting Utility

The RocketRAID 600L/600LS controller will display its BIOS screen

during the system's boot process. The BIOS Utility will display

information about hard drives attached to the adapter. Make sure all

attached drives are detected by this utility. If any of the hard drive is

not detected, power down the system and check the power and

cable connections.

Press "Ctrl+H" key combination to access the RocketRAID 600L/600LS

adapter's BIOS Utility.

The RocketRAID 600L/600LS controller BIOS utility is an interface that

provides management commands and controller related settings.

Note: The following screenshots depict the RocketRAID 642L BIOS

utility. However, all RocketRAID 600L/600LS models utilize the same

interface.

Table of Contents

Rocketraid 600ls