Operation - Toyota 2H Repair Manual

E M · 1 0
E N GIN E WILL NOT SHUT O F F W I TH STOP B UTTO N OR KEY
(Possible Cause)
B I N D I N G STOP C A B L E
I M PROPER E D I C S Y S T E M
3. 12H A/T A N D 1 2 H·TI
I M P RO P E R I N T A K E S H UTTER
O P E RATION
E N G I N E M E C H A N I C A L
-
Diesel Engine Diagnosis
(C heck Procedure and Corre c t i o n M e thod)
Operate stop lever (adjusting leved on side of
injection pump and check if engine stops.
If so, stop cable is binding or maladjusted and should
be repaired accordingly,
If engine does not SlOp. injection pump is faulty and
should be replaced. (See page
Operate SlOP lever (adjusting leved on side
of injection pump and check if engine stops.
is
If so. EOIC system faulty and should
be repaired . (See page ST
If engine does not SlOp. injection pump is
faulty and shOuld be repaired. (See page
Close the intake shutter and check if engine stops.
If il does, the intake shutter syslem is faulty
and s hould be repaired. (See page
FU-29)
-21l
FU-291
EM-33
or
34)