Heitronic 27744 Installation And Operating Instructions

GB Installation and operating instructions
LED light
Art. No. 27744, 27745
Many thanks for deciding to buy our lights.
Our LED light is made out of sturdy, high value materials and will provide you with quality lighting. The
light can be used both indoors and also outdoors.
Please read through installation and operation instructions carefully and keep these in a safe
place for future reference.
We do not accept liability for damage to persons or property caused by non observation of the
instructions, improper handling or for unauthorized changes made to the product.

Package contents:


2x & 1x LED light

Installation and operating instructions

Technical data:

Connection for each
Article
lamp
27744
12V DC, 3,5W
230V AC
Power Supply
sek: 12V, 550mA
27745
3V DC, 1,5W
230V AC
Power Supply
Sek: 3V, 350mA

Safety and warning notes:


Do not look directly into the LED - especially for longer periods of time - without protecting
your eyes. A LED beam should not be directed into other people's eyes.

Make sure, before using the light that it has not been damaged during transportation. Do not
operate the light if the cable or the electrical parts are damaged. Repairs may only be done by
a specialist electrician.

Keep packaging materials well away from children and pets. Danger of suffocation!

Be careful. The packaging contains small parts which can be swallowed by children.

Do not leave children unattended in the area of the lights or other electrical appliances.

Never expose the lights into water or other liquids !

The illuminant is hot when it is in operation. The outer lamp housing will also be hot. Do not
touch the light with your bare hands when it is being operated.

The entire product must neither be changed nor converted. Changes made to the light lead to
annulment of the guarantee (warranty).

Care and servicing:


You must make sure that the power supply is disconnected before cleaning.

Use a dry, or slightly damp cloth for cleaning.

Never use chemicals, inflammable cleaners or abrasives for cleaning. These can damage the
surface and / or the insulations of the light.
Installation instruction Art. No. 27744,27745
Illuminant
LED illuminant
cannot be changed
LED illuminant
cannot be changed
LED illuminant
cannot be changed
LED illuminant
cannot be changed
Page 1 of 2
Protection Protection
type Class
IP 20 II
IP 20 III
IP 20 II
IP 20 III
®
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Status 30/03/2015