Table of Contents
Advertisement
5 Familiarising yourself with your appliance
5.1 Controls
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Increasing the fan setting
Switching on intensive mode
Decreasing the fan setting
Switching on the fan run-on
Switching on the boost function
Switching automatic mode on or off
Switching the lighting on or off
Setting the brightness
6 Basic operation
6.1 Switching on the appliance
Press
.
▶
a The appliance starts at fan setting 2.
6.2 Switching off the appliance
Press
.
▶
6.3 Selecting a fan setting
Press
or
.
▶
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Press
repeatedly until
▶
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
6.5 Switching off intensive mode
To select a fan setting of your choice, press .
▶
appears on the display.
Familiarising yourself with your appliance en
5.2 Display
You can see the current setting values in the display.
Grease filter saturation indicator
Odour filter saturation indicator
-
Fan settings
Fan run-on
Intensive mode
Automatic mode
Home Connect
6.6 Switching on the boost function
The boost function is a short-term maximum power set-
ting which can be activated in any fan setting.
Press .
▶
a After approx. 20 seconds, the fan automatically
switches back to the fan setting that was previously
set.
6.7 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
Press
until
appears on the display.
▶
a The fan run-on starts at fan setting 1.
a The fan automatically switches off after approx. 10
minutes.
6.8 Switching off the fan run-on
Press
.
▶
6.9 Switching on automatic mode
The optimum fan setting is set automatically using a
sensor.
Press
.
▶
6.10 Switching off automatic mode
Press
.
▶
7
Advertisement
Table of Contents
