Table of Contents
Advertisement
en Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Controls, variant 1 and 2
You can use the controls to configure all functions of
your appliance and to obtain information about the op-
erating status.
Switches on fan setting 1.
Switches fan setting 2 on.
Switches on fan setting 3.
Switching on the lighting
Switching off the lighting
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Setting an operating mode
Your appliance is set to air extraction mode by default.
Note: When using it in circulating-air mode, you require
additional accessories.
7 Basic operation
7.1 Control panel, variant 1 and 2
Switching on the appliance
▶
Pull out the filter pull-out.
a The appliance starts at the selected fan setting.
Switching off the appliance
▶
Slide the filter pull-out as far as it will go.
Selecting a fan setting
▶
Press , or .
Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
▶
Press
.
6
5.2 Controls, variant 3
You can use the controls to configure all functions of
your appliance and to obtain information about the op-
erating status.
Switch the appliance on or off
Increase the fan setting
Decrease the fan setting
Switch the lighting on or off
▶
When using it in circulating-air mode, set the operat-
ing mode.
Switching off the lighting
▶
Press .
7.2 Control panel, variant 3
Switching on the appliance
1.
Pull out the filter pull-out.
2.
Press
.
a The appliance starts at fan setting 2.
Switching off the appliance
1.
Press
.
2.
Slide in the filter pull-out.
Selecting a fan setting
▶
Press
or
.
Advertisement
Table of Contents
