Familiarising Yourself With Your Appliance; Accessories; Basic Operation - Siemens LC65FCJ 0T Series User Manual And Installation Instructions

Table of Contents

Advertisement

en Familiarising yourself with your appliance
5  Familiarising yourself with your appliance
5.1 Controls
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
6  Accessories
You can buy accessories from the after-sales service,
from specialist retailers or online. Only use original ac-
cessories, as these have been specifically designed for
your appliance.
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance. → Page 10
You can find out which accessories are available for
your appliance in our catalogue, in the online shop or
from our after-sales service.
www.bosch-home.com
7  Basic operation
7.1 Switching on the appliance
Press the symbol for the required fan setting.
a The appliance starts at the selected fan setting.
7.2 Selecting a fan setting
Press the relevant symbol to set the corresponding
fan setting.
7.3 Switching off the appliance
Press the symbol for the selected fan setting again.
7.4 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
While the appliance is in operation, press and hold
the operation symbol for 2 seconds.
a The appliance switches off automatically after
5 minutes.
Notes
¡ The selected operation symbol flashes while the ap-
pliance is in operation.
¡ The run-on does not affect the lamp.
6
Switch on fan setting 1.
Switch on fan setting 2.
Switches on fan setting 3.
Switch the lighting on or off.
7.5 Switching off the fan run-on
Press
,   or  ⁠ .
a The ventilation continues at the selected fan setting
and does not switch off automatically.
7.6 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
Press
⁠ .
Properties of the lamp
You can find information about the lamp here.
Note: The bulb must only be changed by customer ser-
vice.
Description
Stainless steel, rectangular design,
S2000 LED lamp
Voltage
12 VDC
Power
1 W
Dimensions
54 mm x 26 mm x 14 mm
(HxWxD)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc95fcj 0t seriesLc95fcj60t

Table of Contents