Solving Problems - Dell SP2008WFPF User Manual

Table of Contents

Advertisement

Back to Contents Page
 

Solving Problems

Dell™ SP2008WFP Flat Panel Monitor
  Troubleshooting Your Monitor
  General Problems
  Product Specific Problems
  USB Problems
  Troubleshooting Your Soundbar
 
CAUTION: Before you begin any of the procedures in this section, follow the
 
Troubleshooting Your Monitor
 Self-Test Feature Check (STFC)
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly
connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and monitor.
2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog(blue
connector) cables from the back of computer.
3. Turn on the monitor.
NOTE: The floating 'Dell Self-test Feature Check' dialog box should appear on a black background if the monitor cannot sense a video signal.
Using the input select button, select the desired input to be tested either Analog Input or Digital Input. Disconnect the video cable from the video
card and the Dell Self-test Feature Check dialogue box will appear if the display is operating correctly.
This box also appears during normal system operation if the video cable becomes disconnected or damaged.
4. Turn off your monitor and reconnect the video cable, then turn on both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer system; your monitor is functioning
properly.
OSD Warning Messages
One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization.
Great user manuals database on
1. Auto Detect (Analog Input)
Cannot Display This Video Mode
Optimum Resolution 1680 x 1050  60Hz
2. Analog Input
Cannot Display This Video Mode
UserManuals.info
safety
instructions.
   or     
   or     
1. Auto Detect  (Digital Input)
 or 
Cannot Display This Video Mode
 
Optimum Resolution 1680 x 1050 60Hz
3.Digital Input
 or 
Cannot Display This Video Mode
 

Advertisement

Table of Contents
loading

Table of Contents