Using The Osd Menu - Dell SP2008WFPF User Manual

OSD menu / select
Down (-) and Up (+)
Brightness Menu
Auto Adjust
Power Button and Indicator

Using the OSD Menu

NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor automatically saves those
changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1. Press the Menu button to open the OSD menu and display the main menu.
Main Menu for Auto Detect Analog (VGA) Input
Great user manuals database on
The Menu button is used to open and exit the on-screen display (OSD), and exit from menus and sub-menus. See
Using the OSD Menu.
Use these buttons to adjust (decrease/increase ranges) items in the OSD menu.
Use this button to launch Brightness menu.
Use this button to activate automatic setup and adjustment. The following dialog appears on a black screen as the
monitor self-adjusts to the current input:
Auto Adjustment button allows the monitor to self-adjust to the incoming video signal. After using Auto
Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse), Phase (Fine) controls in the OSD.
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or
attached cables.
Use the power button to turn the monitor on and off.
The blue light indicates the monitor is on and fully functional. An amber light indicates power save mode.
UserManuals.info
or
Auto Adjust In Progress
Main Menu for Auto Detect Digital (DVI) Input