Using A Tripod; Lens Hood - Mamiya RB67 Pro SD User Manual

Using a tripod

The use of a large, sturdy tripod is recom-
mended for optimum picture quality.
1. The standard tripod has a 1/4 inch tripod
screw. Simply attach the RB67 Pro-SD as you
would any other camera with standard threads.
2. When using a tripod with a 3/8 inch screw,
first remove the small screw in the base of the
tripod socket by turning if counterclockwise
with a coin or an appropriately sized screw
driver. Next, remove the 1/4 inch adapter (A)
from the tripod socket by rotating it counter-
clockwise. The camera can then be mounted
on a 3/8 inch screw tripod.

Lens hood

The lens hood attached to the standard
127mm lens can be used for the 90mm lens.
Screw the attachment ring into the front of
l
the lens mount.
Pull the folded rubber hood straight out.
l
The lens hood may be left on when the
l
camera is being carried - simply push
back and turn out the hood while it is
attached to the lens.
A filter can be screwed in between the lens
l
and the hood, or in front of the lens hood.
Used on 50mm. and Used on 90mm, and
65mm lenses 127mm lenses
(77mmø screw-in type)
(80mmø slip-on type)
For the 100-200mm
For the 75mm lens
zoom lense
f/3.5 lens
(80mmø, slip-on type) (60mmø, slip-on type)
3 4
Used on 140mm, 150mm,
For the 500mm lens
180mm, 210mm, 250mm,
(IOBmma.
and 350mm lenses
(77mmø, screw-in type)
For the 360mm lens
(77mm0, screw-in type)