Unloading The Film - Mamiya RB67 Pro SD User Manual

15. Unloading the Film

After completing the last exposure,
completely wind the backing paper on to
the take-up spool.
1. Open the back cover of the holder and
remove the film insert. Press the right side
spool release pin, remove the full spool, then
wrap and seal the film to protect it from loosen-
ing.
2. Move the empty spool to the take-up side
and the camera is ready for reloading.
The exposure counter automatically resets
l
to S (start) as soon as the back cover is
opened.
When the exposure counter shows other
l
than S, film is in the holder. Be careful not to
open the back cover in this mode!
Winding up film when unexposed
frames remained in the holder
2 6
Handling of Exposed Film
DO NOT remove exposed film from
the camera unde direct sunlight. Find
a shaded area or turn your back to
the sun and shade the camera before
you open it.
When removing the exposed film, be
l
careful to prevent it from unraveling
on the spool. Gently tighten the paper
trailer, moisten the attached seal, and
secure the film to prevent light leaks.
Immediately place exposed film in
l
your camera case or a bag, away
from sunlight.