Attaching the Roll Film Holder:
While holding the Rubberized Finger
Rest @ on both sides of the holder,
position the Bottom Coupler of the
holder @ properly to the Holder
Mounting Bracket @ of the body.
Press the upper part of the holder
together with the body until clicks.
Removing the Roll Film Holder:
Insert the Dark Slide between both
white lines I& To remove the holder,
push the Button @I away from the
camera body while pressing down on
the Lock Release Button @
The green line on the Dark Slide
indicates the position to which the
Dark Slide can be inserted into
the Roll Film Holder without
blocking the image.
Green Line
9