Peavey AQ 12 Operating Manual page 16

Specifications
Frequency Response: 68 Hz to 19 kHz, +/- 6 dB, anechoic environment
Usable Low Frequency limit (-10 dB point anechoic): 55 Hz
Nominal sensitivity (1W @1M, swept sine input in anechoic environment):
95 dB (average)
Maximum Sound Pressure Gain (1 meter):
125 dB SPL peak with music
Radiation Angle measured at -6 dB point of polar response:
Nominal: 110 degrees horizontal X 80 degrees vertical
(Axis of the vertical main polar lobe is angled down 10 degrees, resulting in the angular pattern with respect to
straight ahead being +30, -50 degrees)
Transducer Complement:
Heavy-duty 12" woofer with 2" voice coil & 44 oz. magnet
DX™14 1.4" titanium diaphragm dynamic compression driver
Box Tuning Frequency: 52 Hz
Electroacoustic crossover frequency: 1.9 kHz
Crossover type:
Internal Electronic DSP based two-way crossover with driver EQ, level matching, bass boost, limiting and sub-
sonic filtering.
Crossover Slopes:
Linkwitz-Riley 24 dB/octave (4th order) low pass, 24dB/octave (fourth order) high pass, both with driver EQ
incorporated.
Input Connections:
One combo female XLR / 1/4" phone jack providing balanced line-level operation from the 1 / 4" jack section,
and the XLR section.
Bluetooth® input via wireless link, with pairing options.
Output Connections:
One male XLR jack. The Thru/Mix jack is intended for the use of linking multiple AQ™12's in a line or to pro-
vide a feed to a powered subwoofer, or other electronics that needs to receive a full range version of the input
signal.
The Mix function converts this jack to provide a mixed signal of the input jack and the Bluetooth® source.
Enclosure Materials & Finish:
Black injection-molded plastic with textured surface, black powder-coated perforated full-coverage grille.