Advertisement
TM
2.1 Product Feature
2.1.2 List of function
Category
Level1
Temp setting
Operation mode
Display indoor temp.
Basic
function
Fan Speed
Wind direction
Air Purify
Energy saving cooling
Robot cleaning
(manual)
Electric Heater
Humidification
Sub
function
Fan auto
Comfort cooling
*ODU Function
Ventilation kit
Mosquito away
2 _
Wired remote controller
HVAC Solution
Level2
Level3
Single set(1 set)
cooling
Dehumidification
Monsoon dehumidification
*Only for India
Heating
Fan
AI for C/O
AI or Auto changeover
Auto Changeover
(single set point)
for H/P
Power cooling
Power heating
Himalaya cooling
*Only for India
-
Slow
Low
Medium
High
Super high
Auto
Up-down swing
Left-right swing
Comfort wind(Swirl)
Indirect wind
Direct wind
Smart mode
Refresh mode
-
-
-
-
-
-
-
-
*Only for India
-
-
Cool the room to the desired temperature.
-
It removes the moisture with cooling.
-
It is a special function only for India
-
heats the room the desired temperature.
-
Fan only operation, no cooling or heating.
The product automatically provides the appropriate fan speed based on the
temperature of the room
-
It provides strong cooling in short time.
-
It increases indoor temperature quickly.
Himalayan cooling is a combined function of power cooling + vane swing, which
-
is a region-specific feature applied to India wall mount models.
It is a special function only for India
-
It display indoor temperature.
-
-
-
It is a function to set the Fan speed of the indoor unit.
-
-
-
-
-
It is a function to set the wind direction of the indoor unit.
-
It operate at the minimum angle.
-
Provides air flow that blows away from user for comfort.
It operate at the maximum angle.
-
It is suitable for high ceiling.
-
Smartly keeps set temperature by adjusting the wind direction automatically.
Adjust the temperature of the direct and indirect wind to create a comfortable
-
and efficiency working environment.
-
It makes the indoor air clean and pleasant.
This is a function that improves the user's comfort and power saving performance
-
by raising the desired temperature after an appropriate time elapses after the
indoor temperature reaches the desired temperature during cooling operation.
Robot cleaning function is the function to automatically perform the filter clean-
-
ing with the cleaner in the product when the air conditioner is used for certain
period of time.
It is the function to reinforce the heating capability by turning on the electric
-
heater during the heating operation.
It is the function to activate the humidifier installed in the product when the
-
indoor air is dry.
It is a function to operate indoor fan only when comp ON.
-
This is to prevent noise caused by changing the control air volume when switch-
ing the compressor On/Off.
The comfort cooling is the function to automatically control the cooling strength
to maintain the pleasant feeling without turning off the product after the indoor
-
temperature reached the desired temperature.
(If ODU set continuous cooling functions, can use this function)
-
You can turn on and off the ventilation kit installed in the product.
This function activates / stops the mosquito chase function.
-
It is a special function only for India
DESCRIPTION
-
Advertisement
