Mestra GP CUT User Manual

User Guide
Ref. 100349
Components
(1) Cap
(2) Front
(3) Power Button
(4) Handle
(5) Battery cover
(6) Stand Base
(7) Two AA batteries (not shown)
(8) Large Tips (2.0 mm)
(9) Medium Tips (1.2mm)
(10)Small tips (0.5mm)
The device has been tested to meet the following standards: IEC 60601-1, IEC 60601-1-2, 93/42/EEC, and ISO 13485.
Manufacturer:
Motion Dental Equipment Corp.
Address: 6F-2 & -3, No. 27, Lane 61, Sec. 1, Guangfu Rd., Sanchong District, New Taipei City, Taiwan (R.O.C)
TEL：+866-2-2278-2199 FAX: +886-2-8511-2492
Website: http://www.motiodental.com
GP CUT
Gutta Percha Cutter
Specification
Dimension (LxW)
Voltage
Tip Type
Temp. Reach
Cool down period
Stand base size
GP CUT Feature
1. One button only, two batteries power supply, easy use design.
2. Three tip size available.
3. One second hip up to 500 degree high temperature.
4. Fast tip cool down design, safety use.
5. Flexible tip design, cutting smoothly.
Simple to Use
1. Install two AA batteries when first using the GP Cut device.
2. Insert the selected tip on the front of GP Cut. The tip is flexible
design to let you cut smoothly.
3. Press the power button and the tip can heat up to 500
immediately.
4. Cut Gutta Percha.
5. Release the power button and the tip can cool down fast.
6. Put tip cap back after using.
7. Put GP Cut back on stand base.
CAUTION:
(1) DO NOT touch tip during operation due to high
temperature.
(2) DO NOT press power button over 5 seconds.
(3) NO water sprays on unit.
NOTE:
(1) If you can't cut Gutta Percha quickly, please replace battery
immediately.
(2) The tip can be used until it cut off.
E-mail: motion@twmotion.com
20cm x 1.85 cm (tips include)
2 AA batteries (DC 3V)
3 Tips
(L: 2.0mm; M: 1.2mm; S: 0.5mm)
Over 500 degree
less than 1 second
3 cm x 2.5 cm
P/N:3550003 Ver.2015/07/01
C
O