Advertisement
www.malmsten.com
2.3
Assembling the floats
2.3.1 Install the positioning sleeve to the floats using:
1)
Positioning sleeve (9) – 2 pcs
2)
Right float (1) – 1 pcs
3)
Left float (2) – 1 pcs
4)
Clamping plate (14) – 2 pcs
5)
DIN 912 Hex socket cap screw M10x100 (28) – 2 pcs
6)
DIN 125 10,5 A4 stainless steel washer (17) – 2 pcs
7)
DIN 985 M10 nut (18) – 2 pcs
Join together side and rear floats:
2.3.2
In the rear float (3) you will find 4 screws and 4 nuts pre-
assembled. Loosen the nuts and remove the screws:
2.3.4
Move the 80x40 mm rectangular profile towards the front
to hide it below the float's casing:
2.3.3
Move the rear float into the side ones:
2.3.5
Screw the previously removed bolts with nuts tightly
Art. No. 1511001
Advertisement
