Declaration; Product Erp Guidelines - Riello RDB1R GRANT MILTON 20 kW Installation, Use And Maintenance Instructions

1

Declaration

Declaration of Conformity in accordance with ISO / IEC 17050-1
These products are in compliance with the following Technical Standards:
• EN 12100
• EN 267
According to the European Directives:
MD 2006/42/EC Machine Directive
LVD 2014/35/UE Low Voltage Directive
EMC 2014/30/UE Electromagnetic Compatibility
The quality is guaranteed by a quality and management system certified in accordance with ISO 9001:2015.
2

Product ERP Guidelines

GUIDELINES FOR THE PLACING ON THE MARKET AND/OR PUTTING INTO SERVICE OF BURNERS, IN ACCORDANCE WITH
THE REGULATION (EU) No. 813/2013 IMPLEMENTING DIRECTIVE 2009/125/EC.
A RIELLO burner (Heat Generator), where it is matched with a water-based boiler (Heater Housing) with a nominal output  400 kW,
providing heat for heating purposes and heat to deliver sanitary hot water, can be installed:
• With boilers (heater housings) already in service in the field, for replacement, in conformity to Article 1, paragraph 2, point (G) of
the EU Regulation No. 813/2013;
• With boilers (heater housings) on a new installation, if they have emissions complying with the requirement of Annex II, paragraph
4 of the EU regulation No. 813/2013.
20166849
Declaration
SPECIFICATION FOR THE EUROPEAN UNION ONLY
2 GB