Advertisement
- Never rest the appliance into a surface while in use.
- Do not use the appliance on any part of the body of a person or animal.
- Do not use the appliance to dry textiles of any kind.
- Turn the thermostat control to the minimum (MIN) setting. This does not
mean that the iron is switched off permanently.
Service:
- Make sure that the appliance is serviced only by specialist personnel, and
that only original spare parts or accessories are used to replace existing
parts/accessories.
- Any misuse or failure to follow the instructions for use renders the guaran-
tee and the manufacturer's liability null and void.
Instructions for use
Before use:
- Remove the appliance's protective film.
- Make sure that all the product's packaging has been removed.
- Some parts of the appliance have been lightly greased. Consequently, the
first time the appliance is used a light smoke may be detected.
- Prepare the appliance according to the function you wish to use:
Filling with water:
- It is essential to have filled the deposit with water to be able to work with
steam.
- Open the lid of the filling mouth.
- Fill the deposit taking care to observe the MAX level (Fig.1).
- Close the lid of the filling mouth
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the thermostat control to the desired temperature position.
- Do not use temperatures higher than those indicated on the garments to
be treated.
● Temperature for synthetic fibres (Polyester, Nylon...).
●● Temperature for silk and wool.
●●● Temperature for cotton. (Minimum temperature for steam ironing)
Max Temperature for linen.
- If garment has various kinds of fibres, select the temperature for the fibre
that requires the lowest temperature. (For example, select the temperature
for polyester for an article made out of 60% polyester and 40% cotton).
- Wait until the pilot light (F) has gone out which will indicate that the
appliance has reached an adequate temperature.
- During the use the pilot light (F) will automatically flash on and off, thus
indicating the heating elements are operating in order to maintain the
desired temperature.
Dry ironing:
- The appliance has a steam flow regulator that permits dry ironing (without
steam) when placed in the 0 position.
Steam Ironing:
- It is possible to iron with steam whenever the deposit is filled with water
and the adequate temperature is selected.
Steam flow control:
- The appliance has a (C) control knob that allows to get the control of the
steam flow.
Spray:
- The spray can be used in both steam and dry ironing.
- Press the spray button (A) to use this operation.
- The spray button has to be pressed repeatedly to release the first spray.
Steam blast:
- This function proportions extra steam for eliminating wrinkles.
- Press the steam blast button (B). Wait a few seconds until vapour penetra-
tes the fibres of the garment before pushing the button again. For optimum
steam quality, do not apply more than three successive blasts.
- The steam blast button has to be pressed repeatedly to release the first
shot.
Vertical steaming:
It is possible to iron hanging curtains, items of clothing on his hanger, etc.
Geyser.indb 11
To do so, follow the instructions:
- Select the maximum temperature of the iron, while turning the temperature
regulator of the iron in a clockwise direction (Fig 2).
- Move the iron in a top to bottom direction while pressing the steam control
(B). Important: for cotton and linen, its recommended to put the iron base in
contact with the material. For other more delicated fibres, it's recommended
to keep the iron base at some centimetres of distance.
Auto-off function: *
-For energy-saving purposes, the appliance goes to auto-off status if it is
not moved for a pre-determined time period. When this happens, an audible
warning is heard and the suto-off indicator lamp (G) flashes, indicating that
the function is active.
- Auto-off in horizontal position: after approximately 30 seconds without
moving the appliance.
- Auto-off in vertical position: after approximately 8 minutes without moving
the appliance.
- To return to normal functioning, simply move the appliance again.
(*) Only available in model Geyser Titanium 2600
Once you have finished using the appliance:
- Select the minimum position (MIN) using the thermostat control.
- Unplug the appliance from the mains.
- Remove the water from the water tank.
- Clean the appliance.
Cleaning
- Disconnect the appliance from the mains and let it cool before undertaking
any cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach,
or abrasive products, for cleaning the appliance.
- Do not submerge the appliance in water or any other liquid or place it
under running water.
Self-cleaning function:
- It is important to self-clean the appliance at least once a month to remove
calcium and any other built-up minerals inside the iron.
- Fill the depository to its maximum level, as indicated on "water fill" section
- Place the iron in the vertical position, plug into the mains and select the
maximum temperature.
- Leave the appliance to heat up until the pilot light indicates that it has
reached its consigned temperature.
- Unplug the appliance and place in the sink.
- Press the self-clean button, and keep it pressed down.
- Let the water flow out through the steam vents in the base, while lightly
shaking the appliance.
- Release the button after a minute or when the tank becomes empty.
- Leave the iron in the vertical position until it has cooled.
Anomalies and repair
- Take the appliance to an authorised technical support service if problems
arise. Do not try to dismantle or repair without assistance, as this may be
dangerous.
For EU product versions and/or in case that it is requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists are
included in a collection, classification and recycling system. Should you
wish to dispose of them, use the appropriate public recycling bins for each
type of material-
- The product does not contain concentrations of substances that could be
considered harmful to the environment.
11/07/2013 15:41:33
Advertisement
