Safety - Husqvarna 120iTK4-H Operator's Manual

jump from one point to other points by
arcing. The higher the voltage is, the
larger distance the current can jump. The
current can also go through branches and
other objects, especially when they are
wet. Always keep a minimum distance
of 10 m between the product and high-
voltage power lines and/or all objects that
are touching them. If you must work in
this safe distance, always tell the related
power company to make sure the power is
off before you start work. Keep a minimum
of 15 m to other persons or animals during
the operation.
(Fig. 14)
This product conforms to the applicable
UK regulations.
yyyywwxxxx The rating plate shows the serial num-
ber. yyyy is the production year, ww is
the production week.
Note:
Other symbols/decals on the product refer to
certficaion recuirements for some markets.
Symbols on the battery and/or on the
battery charger
Recycle this product at a recy-
cling station for electrical and
(Fig. 18)
electronic equipment. (Applies
to Europe only)
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
Used if there is a risk of
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
1553 - 008 - 31.10.2022

Safety

Used if there is a risk of
(Fig. 15)
Fail-safe transformer.
(Fig. 16)
Use and keep the battery charger indoors
only.
(Fig. 17)
Double insulation.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
General power tool safety warnings
WARNING:
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Note:
Save all warnings and instructions for future
reference. The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
Work area safety
• Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Read all safety warnings
5