WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Belt Sander Belt speed Overall 1,000 m 380 mm (14-31/32") 3,280 f t , ) / m ~ n . MODEL 9031 length weight 2.1 kg (4.6 Ibs)
SAFETY INSTRUCTIONS WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. 2.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in. 16.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY t o the user the tool.
Installing the side grip For your own safety, always use the side grip. Install it by screwing it firmly on the grip holder. The side grip can be pivoted for easy operation. See the figure a t right. Installing or removing the abrasive belt CAUTION Always be sure that the tool is switched off and unplugged before installing or removing the belt.
Switch action CAUTION : Before plugging in the tool, always check t o see that the switch trigger actuates properly and returns to the "OFF" position when released. If i t does not operate properly, do not use the tool. Have repaired immediately.
Dust extraction Open the nozzle cap. Connect the hose of a vacuum cleaner/dust collector to the nozzle. Nozzle Vacuum cleaner CAUTION : Always close the nozzle cap when the hose of a vacuum cleaner/dust collector i s not connected to the nozzle. Never insert your finger into the nozzle.
'To maintain product SAFETY and RELIABILITY, repairs, nay other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Brush holder...
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present accessories or attachments should Abrasive belt per pkg) used only in the proper and intended manner.
-'95 June-01 BELT SANDER Model 9031 Note: The switch and other part configurations may differ from country country.
MODEL 9031 ' : " O M DESCRIPTION MACHINE Grip Hex Bolt Max40 Cap 30 Spring Pin 4 - 2 0 Tapping Screw 4x25 Flat Shoe Tapping Screw Bind CT 5x12 Compression Spring 13 Flat Washer 12 Wmg Nut M 1 6...
MAKITA Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one- year period, return the COMPLETE tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers.