ConnectX®-3 Dual Port 40Gb/s and 56Gb/s Mezzanine Card for Dell User Manual
Line up the mezzanine card so that the pins of the mezzanine card are over the sockets in the blade
server.
5.
Plug the card into the socket by placing your thumb over the UPC symbol and pressing down
until the card reaches the bottom.
6.
Close the retaining clip.
Great user manuals database on
Figure 10: Remove the Cover
Hold the mezzanine card by the edges only.
Figure 11: Press on the Card
UserManuals.info
Rev 1.0
21
Mellanox Technologies