Sunbeam 32610047 Owner's Manual page 3

LEARNING ABOUT YOUR SUNBEAM
STEAM BURST HANDHELD STEAMER
1
2
4
5
3
6
1. Fur Brush
2. Steam trigger
3. Water reservoir release button
4. Reservoir stopper
5. Water reservoir aperture
6. Water reservoir
7. Steam head
8. Setting indicator button
9. Handle
10. Cable strain relief & mains cable
11. Stand
English - 3
®
7
8
9
10
11
OPERATING INSTRUCTIONS
FILLING WATER TANK
Warning: To avoid personal injury and damage to the unit, only add water
to the water tank. NEVER add cleaning solutions, perfumes, oils or any other
chemical additives.
Note: Your Steamer is designed to be used with tap water. However, if you
have hard water, we recommend using distilled water for better results.
1. Filled the water tank with water.
2. Press the water reservoir release button and slide out the water reservoir
from the stand (Figure 1).
3. Plug the steamer into a standard electrical outlet.
Warning: When filling the water tank, watch for water that can drip
onto the floor and cause you to slip and fall.
Figure 1
Figure 2
English - 4