Do you have a question about the 32610075 and is the answer not in the manual?
Questions and answers
Lizzy
May 14, 2025
My iron won't turn on. I've tried several plugs. Ideas?
1 comments:
Mr. Anderson
May 21, 2025
If your Sunbeam iron model 32610075 won't turn on, possible issues could include:
1. The iron is not plugged into the electrical wall socket properly. 2. The wall socket is not providing power. 3. The ON/OFF indicator light is not functioning, making it seem like the iron is off. 4. There is an internal fault or defect, which may require contacting customer service for repair or replacement under the 3-year limited warranty.
Do not attempt to fix the iron yourself.
This answer is automatically generated
richard
June 4, 2025
Steam selector switch: the first position is Closed. What are the other two? There is no diagram for it, as there is for the temperature control.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety instructions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THE STEAM IRON. 1. READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. 2. Use appliance only for its intended use. 3.
Page 3
13. If an extension cord is absolutely necessary, a cord with an ampere rating equal to or greater than the maximum rating of the iron shall be used. A cord rated for less amperage can result in a risk of fire or electric shock due to overheating.
DESCRIPTION OF THE APPLIANCE 1: Soleplate 7: ON/OFF indicator light 2: Spray nozzle 8: Handle 3: Water filler cap 9: Temperature control dial 4: Steam selector 10: Water tank 5: Spray button 6: Shot of steam button...
BEFORE FIRST USE • When using the iron for the first time, test it on a piece of old cloth to be sure that the Soleplate and the Water reservoir are clean. • It is possible that the iron will discharge some smoke or give off a slight odor during it is first usage.
DRY IRONING 1. Insert the plug in the electrical wall socket. 2. Make sure that the Steam Select Switch is in the closed position. 3. After the Indicator Light goes off, you may start to iron. STEAM IRONING Steam ironing is only possible at high temperatures (silk, wool, cotton, linen), as indicated on the Temperature Control Dial (Figure 3).
SHOT OF STEAM ® The Shot of Steam feature provides an extra burst of steam for deep ® penetration of stubborn wrinkles. The Shot of Steam feature can be used ® with dry or steam ironing provided it has at least a ¼ tank of water and the Temperature Control Dial is set within the steam band.
WARNING: To prevent the risk of burns, keep your hand away from the area being steamed. WARNING: DO NOT steam garments while wearing them; this may result in injuries. IRONING TEMPERATURE • Check the ironing instructions on the label of the items that you wish to iron.
TEMPERATURE SETTINGS TABLE Temperature Kind of Textile Fiber Material Control Dial acrylic, modacrylic, polypropylene, synthetic acetate, rayon, viscose, polyester, curpo, modal silk silk wool wool cotton cotton Linen Linen On the label means: This article cannot be ironed (e.g. chlorofiber, elastodiene)
MAINTENANCE AND CLEANING Before cleaning your iron, always make sure that it is disconnected from the electrical wall socket and is completely cool. SOLEPLATE • Residue on the Soleplate can be wiped off with a cloth soaked in a solution of water and vinegar.
Page 11
3 YEAR LIMITED WARRANTY This device has a limited warranty of 3 years from the original date of purchase against workmanship and defects in material. If under normal use, your product fails to operate, please contact our customer service department at info@sunbeamhome.com. A refund or replacement will be provided to you with proof of purchase.
Need help?
Do you have a question about the 32610075 and is the answer not in the manual?
Questions and answers
My iron won't turn on. I've tried several plugs. Ideas?
If your Sunbeam iron model 32610075 won't turn on, possible issues could include:
1. The iron is not plugged into the electrical wall socket properly.
2. The wall socket is not providing power.
3. The ON/OFF indicator light is not functioning, making it seem like the iron is off.
4. There is an internal fault or defect, which may require contacting customer service for repair or replacement under the 3-year limited warranty.
Do not attempt to fix the iron yourself.
This answer is automatically generated
Steam selector switch: the first position is Closed. What are the other two? There is no diagram for it, as there is for the temperature control.