Setup Wizard - TRENDnet TEG-3102WS User Manual

TRENDnet User's Guide

Setup Wizard

Section A: Configuring the switch with TRENDnet Hive Cloud Management
Note: Configuration with TRENDnet Hive Cloud Management requires an existing
network with Internet access and DHCP server for automatic IP addressing. The switch
must be configured to reach the Internet in order to connect to your TRENDnet Hive
Cloud Management account.
1. Assign a static IP address to your computer's network adapter in the subnet of
192.168.10.x (e.g. 192.168.10.25) and a subnet mask of 255.255.255.0.
2. Open your web browser, and type the IP address of the switch in the address bar, and
then press Enter. The default IP address is 192.168.10.200.
3. Enter the User Name and Password, and then click Login. By default:
User Name: admin
Password: admin
Note: User name and password are case sensitive.
4. Select Next to move onto the next screen
Note: If the switch setup wizard does not appear, you can click the setup wizard button
in the top right section of the switch management page to access the switch setup
wizard.
© Copyright 2022 TRENDnet. All Rights Reserved.
Multi-Gig Web Smart Switch Series
5. Change your login password and click Next. The default password is admin.
Note: If entering a new password, please note that you will need to use the new
password when logging into the switch management page for local management access
moving forward.
6. For the method of management, select TRENDnet Hive.
Note: Configuration with TRENDnet Hive Cloud Management requires an existing
network with Internet access and DHCP server for automatic IP addressing. The switch
must be configured to reach the Internet in order to connect to your TRENDnet Hive
Cloud Management account.
13