Download Print this page

Wifi Access Point As A Client - Weidmüller STARTERKIT-UC20-WL2000-IoT Quick Start Manual

Starter-kit / u-control internet of things with node-red (iot)

Table of Contents

Quick Start Guide for Starter-Kit IoT with u-create Web and Node-RED

5.2. WiFi access point as a client

Out of the box the AP is configured with the static IP 192.168.1.110 and can only be accessed

using a wired connection. Connect an ethernet cable between the AP and your PC.

Configure the network adapter to use a static IP in the same subnet, e.g. 192.168.1.100:

Figure 5: Windows network adapter settings

Figure 6: Windows network adapter with static IPv4 address

QSG0033v01

Table of Contents

Do you have a question about the STARTERKIT-UC20-WL2000-IoT and is the answer not in the manual?

2666060000