Abstract; Requirements; Hardware; Software - Weidmüller STARTERKIT-UC20-WL2000-IoT Quick Start Manual

Quick Start Guide for Starter-Kit IoT with u-create Web and Node-RED

2. Abstract

This guide contains instructions on how to activate the starter kit and connect to the controller.
Furthermore, it contains a guide how to setup the controller, setup an internet connection using
the provided wireless access point and download a demo application to the controller. This demo
application utilizes all key components of the starter kit to showcase the implementation of a
simple temperature controller. Building on this temperature controller, the publishing of sensor
values to a public MQTT broker as well as the reception of these values with a MQTT subscriber
is shown.

3. Requirements

For certain parts of this Quick Start Guide you will need an internet connection, to push data to
an IoT-service or to download software. Ideally, to complete every chapter of this guide, the
internet connection is accessible via a simple WPA2-PSK encrypted WiFi (e.g. no corporate
network or eduroam with EAP).

3.1. Hardware

Hardware
STARTERKIT-UC20-SL2000-IOT
PC with Ethernet and full-size USB --------

3.2. Software

Software
Recent web browser
u-control Demo Application
Node-RED Demo Application
QSG0033v01
Order Nr. Comments
Weidmüller
2666060000
Order Nr. Comments
Weidmüller
-------- Microsoft Edge, Firefox, Chrome
-------- Download from Weidmüller, Filetype .ucp
-------- Download from Weidmüller, Filetype .json
5