Generac Power Systems 10 kW Owner's Manual page 44

Control Panel Startup / Testing
2. Verify generator MLCB (generator discon-
nect) is OFF (OPEN).
3. Set generator to AUTO mode at the con-
troller.
4. Generator will start and run. Allow genera-
tor to run and warm up for a few minutes.
5. Set generator MLCB (generator discon-
nect) to ON (CLOSED).
6. Set utility MLCB to ON (CLOSED).
The system now operates in automatic
mode.
40 Installation Guidelines for 60 Hz Air-Cooled Generators