Natural Gas Installation (Typical) - Generac Power Systems 10 kW Owner's Manual

Natural Gas Installation (Typical)

3
NG BTU/h = ft /h X 1000
A Fuel data decal
B Minimum distance from rear obstruction—see
C Manual fuel shutoff valve (pressure port optional)
Must be located no more than 6 ft (1.83 m) away from fuel inlet
D Pipe fittings (field supplied)
E Flexible fuel line
F Verify clearance with gas provider. Regulator should be a minimum of 5 ft (1.5 m) from gener-
ator. Local codes and regulator manufacturer may have further clearance requirements.
G Size gas meter for generator operating at FULL load plus all appliance loads
H For underground installations, verify piping system for code compliance
I Reinforcing rod with clamps
J To gas main
Installation Guidelines for 60 Hz Air-Cooled Generators
A
D
E
Figure 5-6. Natural Gas Installation (typical)
Fuel Conversion / Gas Connections
F
I
C
B
Distance Requirements
G
J
3
Megajoules/h = m /h X 37.26
H
008965
25