Advertisement
Quick Links
Type 1 Plug for Test Adapter EV Charging
Type 2 Plug for Test Adapter EV Charging
Introduction
The FEV300-CON-TY1 and FEV300-CON-TY2 are high-quality
accessories manufactured by FLUKE, which will enable you to perform
repeatable measurements with the Fluke FEV300.
These accessories can be used in combination with other test
equipment from Fluke such as the FEV300 that test function and
safety of charging equipment for electric vehicles.
Safety Information
A Warning identifies conditions and procedures that are dangerous
to the user. A Caution identifies conditions and procedures that can
cause damage to the Product or the equipment under test.
To prevent the possibility of electric shock or personal injury:
•
Read all safety information before you use the Product.
•
Do not alter the Product and use only as specified, or the
protection supplied by the Product can be compromised.
•
Carefully read all instructions.
•
Do not use the Product if it operates incorrectly.
•
Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
•
Limit operation to the specified measurement category,
voltage, or amperage ratings.
PN 5361891, May 2022
© 2022 Fluke Corporation. All rights reserved.
Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
FEV300-CON-TY1
FEV300-CON-TY2
Safety Information
WX Warning
Advertisement
Related Manuals for Fluke FEV300-CON-TY1
Summary of Contents for Fluke FEV300-CON-TY1
- Page 1 FLUKE, which will enable you to perform repeatable measurements with the Fluke FEV300. These accessories can be used in combination with other test equipment from Fluke such as the FEV300 that test function and safety of charging equipment for electric vehicles. Safety Information A Warning identifies conditions and procedures that are dangerous to the user.
- Page 2 The affixed label indicates that you must not discard this electrical/electronic product in domestic household waste. Do not dispose of this product as unsorted municipal waste. For information about take-back and recycling programs available in your country, see the Fluke website.
-
Page 3: Product Disposal
2 hours is required prior to any operation. Available Versions • FEV300-CON-TY1 to be used with EV charging station type 1 with fixed cable and vehicle connector • FEV300-CON-TY2 to be used with EV charging station type 2... -
Page 4: Operation Elements And Connectors
EV connector for charging stations type 2 with panel mount socket outlet or fixed cable and vehicle connector FEV300-CON-TY1 FEV300-CON-TY2 Type 1 plug Type 2 plug How To Test For operation please refer to instruction manual of the relevant test equipment to be used. -
Page 5: Specifications
FEV300-CON-TY1: up to 250 V (single phase system), 50/60 Hz FEV300-CON-TY2: up to 480 V (three phase system), 50/60 Hz Connectors ......FEV300-CON-TY1 Type 1 plug: AC charging mode 3, suitable to IEC 62196-2 type 1 or SAE J1772 with vehicle connector (type 1,... -
Page 6: Limited Warranty And Limitation Of Liability
LIMITED WARRANTY AND LIMITATION OF LIABILITY Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is one year and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days.