Table of Contents
Advertisement
Push in the condensed water
6.
container until it locks into place.
aThe device maintenance has been
fed.
Remark:If the condensed water is
drained away with the drain hose,
enter the
→ †Preparing the condensate
container for device maintenance",
page 37 the steps mentioned in the
reverse order after simple or intensive
device maintenance.
15.5 Intensive device
maintenance on the device
to prepare
If the device is not used for more than
a month, stubborn dirt or odors may
appear. To remove them, intensive
device maintenance can be
performed.
Remark:The intensive device
maintenance takes about 4 hours. If the
required steps are not performed in a
timely manner during the program, the
duration may increase.
After the program has started, the
intensive appliance
please don't be torn down.
Requirements
†The appliance is prepared for
the device maintenance.
→ †Preparing the device for device
maintenance",
Page 36
†Device maintenance has started.
→ †Start device maintenance",
page 37
Press.
▶
aThe display shows alternately
"CP2" and the program duration.
15.6 Perform intensive device
maintenance
Pull out the condensed water
1.
container horizontally and empty
it.
Device maintenanceNL
39
Advertisement
Table of Contents
